How To Use the 510-T Electronic Cigarette
The EC510-T tank system e-cigarette builds on the EC510, delivering increased
battery life, more liquid capacity and easier tank filling using a new
cartridge that doesn't contain traditional tissue absorbent.
To begin using your new ECig 510-Tank, thread the atomizer and battery together (figure 1), then remove a
cartridge from the packaging (remember that the EC510-T and EC901-T use the
same tank cartridge). Remove the rubber cover and cap from the cartridge
(figure 2). Open a bottle of e-liquid by cutting the nozzle tip off and
carefully drip liquid into the tank until full (figure 3). Reinstall the
cap, then screw down the old inhaler and insert the filled cartridge into the
atomizer (figure 4).
Note: The EC510-T is only activated when you press the LED button. You should
always press the LED button and inhale at the same time.
Charging the MEGA 510 Battery:
It's time to charge the battery when your e-cigarette stops producing smoke
and the LED flashes 8 times. To charge it, all you need to do is carefully
thread the battery into the charger (figure 5) and wait for the battery LED
to flash three times. The indicator light on the charger will turn from green
to red to show you it's charging. Once charging is complete the indicator
light will turn green again, usually in about 3 hours. The charger works with
all North American and European household voltages (100 to 240V, 50/60Hz).
510-T How To Video
See more related links: